High quality outdoor wall light up down
Get Latest PricePayment Type: | L/C,T/T,Paypal,Western Union |
Incoterm: | FOB,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Air |
Port: | Jiangmen |
Payment Type: | L/C,T/T,Paypal,Western Union |
Incoterm: | FOB,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Air |
Port: | Jiangmen |
Model No.: W2109 4W
Brand: SYA
Selling Units | : | Piece/Pieces |
Package Type | : | Neutral Packing |
High quality ball design Outdoor wall lamp.2 side emitting or 4 side emitting design selection.with good quality lens.More concentrated light, soft light angle. Advanced aviation aluminum alloy wall lamp body, lamp body surface high temperature painting, rich texture, and not easy to oxidation, do not fade, do not rust。uperior Light Source & LED Driver: 4W, 4x1W high quality LED chips. Light more uniform and wider. Low energy consumption, up to 50,000h of life. High-quality LED driver, built-in intelligent IC chip, 85-265V wide voltage design, suits for different voltage environment.
4W High quality outdoor Wall Light up down | | |
Housing color | White/Black | |
rated voltage | AC85-265V | |
material | Aluminum | |
light color | WH/WW | |
installation | Mounted | |
wattage | 4*1W | |
Product dimension | 115*100*95mm | |
IP | 65 |
Tips:
How to install wall light?
Step 1,The installation of the wall lamp should mark the position of the expansion screw on the wall according to the hole on the wall lamp hanging plate. Use an electric drill to drill holes on the marked points on the wall. Pay attention to understand the wiring layout first, do not drill into the wires, but also pay attention to the depth of the drilled holes.
Step 2.After drilling the holes, you can start to install the expansion screws. First, insert the expansion screws into the drilled holes, and then use a hammer or other objects to drive the expansion screws into the wall until all are submerged in the wall. Pass the wood screw through the hole of the wall lamp hanging plate, and then fix it on the expansion screw. Note that the fixing on both sides should be carried out alternately, so as to avoid the offset of the wood screw.
Step 3,Connect the hanging plate and the ceiling plate with screws, and then tighten the bald screws to fix the ceiling plate. Finally, disconnect the indoor power supply, then connect the wall lamp's wire and power cord, and install the wall lamp.
Remarks:The installation height of outdoor wall lights is generally slightly higher than the eye level, about 1.8 meters. The height of the wall lamp is generally 1440~1850mm from the working surface, and 2240~2650mm from the ground. But the distance between the wall lamp in the bedroom and the ground can be closer, about 1400mm~1700mm. The distance between the wall lamp and the wall is closer, generally 95mm~400mm.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.