IP68 underwater light with tempered glass

Because LED underwater lights are used under the water and need to withstand a certain amount of pressure, they are generally made of stainless steel, 8-10MM tempered glass, high-quality waterproof joints, silicone rubber seals, curved multi-angle refraction strengthened glass, waterproof, and waterproof. Dust, anti-leakage, corrosion-resistant.
1. Safety function: In landscape places, the choice of LED underwater lights takes personal safety as an element. In accordance with the requirements of the national standard safety regulations, LED underwater lights with a safety voltage of 12V are used.
2. Lighting function: The lighting function mainly refers to the luminous brightness of the light source. It can choose different power LED underwater lights according to the illumination height and projection area. Another element of the lighting function is the color of the underwater colored lights, which are generally red, yellow, green, blue, and white, which can be selected according to the application occasion, the illuminated object and the atmosphere created.
3. Appearance and shell material: Although underwater colored lights are used underwater, they are not very eye-catching. However, the appearance and material are related to the specific gravity of the lamp. If the specific gravity is too small, greater buoyancy will be produced, which will easily loosen the fixing screws of the underwater lantern, causing the lamp to float on the surface of the water and too heavy to make the light stand difficult to support. At the same time, due to long-term use in water, the shell material should have a certain anti-corrosion function, and the surface paint should be firm.
4. Economy: The economy of underwater colored lights refers to the sum of the one-time investment and operating costs of the lamps. Generally speaking, better quality underwater lights have higher prices, longer service life and lower operating costs. On the contrary, lower quality underwater lights are cheap, but they are often caused by water leakage and electricity leakage. Leading to failure, not only increased operating costs, and some even affected the acceptance of the entire project.