LED Point Light source:
●The common shape of point light source can be divided into: round and square, and the size ranges from 30mm to 200mm.
●Materials are mainly divided into: die-casting aluminum, car aluminum, plastic, lampshade: PC;
●Common PC cover: transparent diamond mask, transparent bead mask, milky white cover. Different masks will have different effects. The transparent cover has good light transmittance and poor light mixing. It should not be used in the effect of mixed white light. There is no special requirement for RGB lamp beads; the milky white cover has a good effect on mixed white light and is suitable for white light. However, the light transmittance is low, and the position of the monochromatic RGB lamp beads should not be scattered, otherwise the light mixing is not good. It is best to use a single RGB three-in-one light source.
●Control mode: 1. Controlled by external control signal (most of them belong to this category), using DC 12V or 24V; 2. The point light source internally generates control signal, low-voltage AC power supply, when multiple internal control point light sources are connected, the low-voltage AC frequency A synchronization signal between point sources is also provided.
SYALIGHTING Service
1. Intimate follow-up service
2.15 days delivery
3. Provide style customization
4. Provide wiring service
5. Provide installation suggestions
6. Provide drawings and lighting plans
Introduction of LED Pixel lights
LED point light source application scenarios:
1. Outline of buildings, viaducts and bridges; signs and logos;
2. Ground decoration and lighting of urban squares; outdoor advertising display screens, building display screens
3. Decorative lighting for amusement facilities; decorative lighting for ancient buildings
4. The shape of the top of the building is decorated and brightened; the text and image lines are outlined;
5. Shaped and personalized lamps with built-in light source
Since the luminous body of the LED is close to the "point" light source, the design of the lamp is more convenient, but when used as a large-area display, the current and power consumption are both large. LEDs are generally used for display devices such as indicator lights, digital tubes, display panels and photoelectric coupling devices of electronic equipment, and are also commonly used for optical communications, etc., as well as the decoration of building outlines, amusement parks, billboards, streets, stages and other places.
We mainly produce LED Point Source Light，LED Pixel light，LED Project Flood Light, LED Garden Light, Led Wall Washer Light and other indoor and Outdoor LED lamps.
Contact Now
