How to install and use lights in outdoor lighting engineering

The methods of outdoor lighting engineering include floodlighting, contour lighting, silhouette lighting, interior translucent lighting, etc., which can be used alone or in combination. Each mode has appropriate lamps to present its own characteristics.

1.Under the condition of avoiding glare, floodlighting can fully reflect the building and avoid the stereotype caused by the same brightness in a large area. Therefore, according to the structure of the building, the light source and lamps should be installed behind the decoration as much as possible, so that the lamps can avoid people's sight, and the lamps will not damage the overall lighting effect of the building lighting project.

2.Contour lighting is the use of light sources to directly reach the outline of the building. Usually, some light bands are formed by electric light sources or LED light strips, strip lamps and other lamps are used to directly outline the outline of the building. The edge of the building can be outlined by using narrow beam. It is mostly suitable for buildings with unique shape. Contour lights are not suitable for separate use, but only suitable for auxiliary lighting.

3.Internal light transmission lighting is suitable for glass curtain wall, because the shape of the building cannot be illuminated when the glass absorbs light and projects light from outside. For this kind of building lighting, the lighting mode of internal light transmission is generally adopted. Lamps and lanterns are installed indoors to Project light through the glass, the light belt bracket is used for lighting, and the light is directly illuminated outwards. The lamps are arranged at many and scattered points, and lamps are set at the upper edge of the window The inner and outer sides of the luminaire are equipped with shielding boards, which can be installed in a good way, which is a lighting method with very small glare interference.