How to place the embedded parts of the underground light?

1.When installing LED buried lights, the power must be cut off for safety to ensure safe installation.

2.Before the installation of LED buried lights, check whether the connection of LED Underground Light and all supporting accessories are complete. Underground light are fixed underground after installation, which is relatively troublesome to disassemble and assemble. If it is found that there is a lack of accessories after installation, sometimes destructive disassembly is required. Therefore, it should be checked before installation. Generally, the buried LED lamps are DC 12V-24V or AC 100 - 277V, and the safety is guaranteed through power transformation.

3.Before the installation of LED buried lights, dig the buried ditch according to the installation dimensions of LED buried lights, and then fix the embedded parts with concrete. The embedded parts can isolate the main body of the LED buried lamp from the soil and ensure the service life of the LED buried lamp; Although the LED buried lamp has good water resistance, the highly corrosive environment has a certain impact on the lamp body.

4. Before the installation of the LED buried lamp, a wiring device with IP67 or IP68 shall be provided to connect the external power input with the power line of the lamp body. In addition, the power cord of LED buried lights shall be waterproof power cord certified by VDE to ensure the service life of Inground Light.