15 problems needing attention in outdoor lighting maintenance

1.LED Outdoor Lighting must be used at predetermined voltage and frequency.

2. The grounding condition of all grounded lamps must be checked frequently.

3. Special restrictions. The specified lamps are generally used when the ambient temperature is 5~35C.

4. Lamps for indoor use cannot be moved to outdoor use.

5. Ordinary lamps shall not be used on or near heaters such as electrical, gas and kerosene stoves or in places where steam is encountered

6. LED Landscape Light shall not be installed with bulbs exceeding the specified wattage.

7. The power must be cut off when changing the lamp and removing the cover and fuse.

8. The safety lighting fixtures shall be checked regularly to ensure that no abnormality occurs.

9. The lamp for accident shall be installed in high temperature gas (140 ℃).

10. Articles such as paper and cloth shall not be placed near or covered the illuminator.

2022-11-28-03

11. Lamps shall not be repaired in places with gas, steam and other dangerous substances, but shall be repaired in general places; If necessary, ensure the operation safety.

12. Wipe the lamps with warm water or wring the cloth soaked in soapy water instead of gasoline, volatile oil, etc,

13. The metal part of the lamp shall not use polishing powder at will.

14. The dust behind the lamp should be cleaned with a dry cloth or duster.

15. In case of abnormal conditions during the use of lamps, LED landscape light shall be stopped, the power shall be cut off and checked.

2022-11-28-02