How to install LED floodlight?

1.Before installing the LED Project Flood Light, in order to ensure the quality of its use after installation, it is recommended to conduct a detailed inspection of the on-site floodlight before installation to see whether the appearance of the LED floodlight is damaged, whether the accessories are complete, and how about after-sales service. Each item should be carefully inspected.

2.After the appearance is free of damage and the accessories are complete, Outdoor Project Lighting need to be ready for installation after arriving at the site. First, the installation personnel should be organized according to the installation drawings attached by the factory. First, connect several floodlights to see if the installation drawings are correct. If conditions permit, arrange one person to test light one by one, so as to avoid the need to remove the damaged ones after installation.

3. Remind installers of the importance of fixing and wiring, especially the waterproof of outdoor wiring, and try to recheck when fixing and wiring.

4.After the LED Project Flood Light is fixed and connected, when it is ready for trial lighting, try to use a multimeter on the main power supply to check whether there is wrong connection or short circuit.

5. After all the led Project lights are ready for trial lighting, they should be lit for as long as possible. The next day and the third day, they should be rechecked again. After doing this, they are all good, and there will be no problems later.