Best Outdoor LED Wall Lights 2022

The installation method of the wall lamp is relatively simple. After the position is determined, the main thing is to fix the lamp holder of the wall lamp, and the wall lamp is often fixed on the wall by the method of embedded parts or punching.
The first step is to mark the position of the expansion screw on the wall according to the hole on the hanging plate of the wall lamp.
In the second step, use an electric drill to drill holes on the marked points on the wall. Pay attention to understand the wiring layout first, do not drill into the wires, and pay attention to the depth of the drilled holes.
The third step, after drilling the holes, you can start to install the expansion screws. First, insert the expansion screws into the drilled holes, and then use a hammer or other things to drive the expansion screws into the wall until all of them are submerged in the wall.
The fourth step is to pass the wood screw through the hole of the wall lamp hanging board, and then fix it on the expansion screw. Note that the fixing on both sides should be carried out alternately, so as to avoid the deviation of the wood screw.
The fifth step, connect the hanging plate and the ceiling plate with screws, and then screw on the bald head screws to fix the ceiling plate. Finally, disconnect the indoor power supply, then connect the wire of the Wall Light to the power cord, and install the wall light.

Applications

Company Profile

Packing&Shipping